V-TAC VT-5159 Instrucciones De Instalación página 15

Turn ON the Alarm Tone [Go to Settings Menu > Tap on Alarm Tone]:
When detected moving object, camera will make an alarming sound, it will
last 30 seconds by default, if it is triggered continuously in 30 seconds, the
alarm sound will prolong. If this machine supports humanoid detection, the
alarm sound will be triggered only when human's movements are detected.
Turn OFF the Alarm Tone:
There is no alarm sound even when it detected the moving objects
Switch of the infrared light corresponding to the night vision off APP
Turn ON the night vision [Go to Settings Menu > Tap on Night Vision]: Infra-
red light turns on - the picture is black and white.
Turn OFF the night vision [Go to Settings Menu > Tap on Night Vision]:
Infrared light turns off, the picture is colorful.
Automatic night vision: Switch infrared lights automatically according to the
photosensitive reaction, the color of the picture also depends on the photo-
sensitive reaction.
White light switch corresponding to the light bulb icon (Figure 23). In case of
automatic night vision, open the white light by tapping on the bulb icon
(Figure 23), it is bright and the picture is colorful. In the case of automatic
night vision, close the white light by tapping on the bulb icon, it goes off and
the picture's color depends on the photosensitive reaction. In the case of
automatic night vision, Set the white light of automatic, it won't trigger the
white light in the daytime, when moving objects detected at night, the white
light will open automatically. It will last 60 seconds when triggered one time,
if there are no moving objects, it will close after 60 seconds. The white light
time will prolong if there are moving objects during the 60 seconds.
ALARM TONE FUNCTIONALITY
CONTROL OF NIGHT VISION
CONTROL OF WHITE LIGHT
ENGLISH
8