Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Toyota Prius C 2012-2014
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted Matte Black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips pan head screws
• E) (2) #8 x 3/8 Phillips truss head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761
Antenna Adapter: • 40-LX11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench
METRA. The World's best kits.
Installation instructions for part 99-8239B
99-8239B
C
D
™
metraonline.com
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
E
CAUTION!
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
Table of Contents
Metra recommends disconnecting the negative bat -
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Manuales relacionados para Metra 99-8239B
Resumen de contenidos para Metra 99-8239B
- Página 1 • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips pan head screws • E) (2) #8 x 3/8 Phillips truss head screws CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local WIRING &...
- Página 2 99-8239B Dash Disassembly 1. Unclip and remove the trim panel from around the radio including the hazard switch. (Figure A) 2. Remove (4) 8mm bolts securing the factory radio, then unplug and remove the radio. (Figure B) Continue to kit assembly...
- Página 3 (Figure A) (Figure B) antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
- Página 4 Installation instructions for part 99-8239B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 Instrucciones de instalación para la pieza 99-8239B Indice Toyota Prius C 2012-2014 99-8239B Desmontaje del tablero ......... 2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DIN con cavidad •...
- Página 6 99-8239B Desmontaje del tablero 1. Desenganche y quite el panel de moldura que rodea el radio que incluyendo el interruptor de las luces intermitentes. (Figura A) 2. Retire los (4) pernos de 8mm que sujetan el radio de fábrica a continuación, desenchufe y quitar...
- Página 7 Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe el radio para verificar que funcione correctamente.
- Página 8 Instrucciones de instalación para la pieza 99-8239B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...