Metra 99-8204 Instrucciones De Instalación

Toyota corolla 2003-2008
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-8204
Toyota Corolla 2003-2008
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio housing • B) Pocket • C) Trim plate • D) Mounting brackets • E) ISO brackets • F) Rear
support bracket • G) (8) #8 x 3/8" Phillips flat head screws • H) (4) #8 x 3/8" Phillips pan head screws
A
B
E
F
METRA. The World's best kits.
99-8204
C
G
1-800-221-0932
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-1761 - Toyota harness 1987-up
• TYTO-01 - LEX/TOY amp interface 2001-up
Antenna Adapter:
• Not required
TOOLS REQUIRED
• Phillips screwdriver • Socket wrench
D
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
H
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
Tabla de contenido
loading

Resumen de contenidos para Metra 99-8204

  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8204 Toyota Corolla 2003-2008 CaBLeadO Y COneXiOnes de antena (se venden por separado) Arnés de cableado: 99-8204 • 70-1761 - Toyota arnés 1987 y mas • TYTO-01 - LEX/TOY interfaz amp 2001 y mas CaraCterÍstiCas deL Kit...
  • Página 6: Desmontaje Del Tablero 99-8204

    99-8204 Desmontaje del tablero 99-8204 Indice Toyota Corolla 2003-2008 Desmontaje del tablero 1. Quite a presión el marco de 4. Retire (4) pernos de 10mm de la terminación de la palanca de parte inferior de la radio de fábrica. - Toyota Corolla 2003-2008 .................. 2 velocidades y retírelo.
  • Página 7: Radio Preparación De La Vivienda

    (2) tornillos 3. Ubique el arnés del cableado 8 x 3/8 in suministrados. inversa al desmontaje. Phillips de cabeza de cono achatado de fábrica en el tablero. Metra n.° 8 x 3/8 in suministrados. Continuará al ensamble del kit (Figura A)
  • Página 8: Provisión De Radio Iso Din Con Bolsillo

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8204 Provisión de radio ISO DIN con bolsillo "A" 1. Alinee los orificios que se encuentran en los de acoplamiento adecuado de Metra o soportes ISO y monte los soportes en la radio AXXESS. Vuelva a conectar el terminal con los tornillos suministrados con la unidad.

Tabla de contenido