Signal Led; Control Leds - Biamp Vocia VO-4 Operación Manual

Power Indicator LED
The Unit features one power indication LED on the front panel:
1. Not illuminated: The device is not powered.
2. Flashing green: The unit is receiving power but not data, or the unit has not been configured
correctly.
3. Solid green: The unit is operational. Power supply and network traffic are functional.

Signal LED

Four LEDs located in the center of the front panel act as audio signal identifiers for the 4 output channels
and are useful for setting optimum signal levels. Each LED has four states. Please see the table below for
the signal mapping to each of the LEDs. Detailed metering of current output levels can be obtained in real
time via the Vocia software interface.
Red Amber
Signal above clip Signal above nominal but
threshold below clip threshold
> -2dBFS > -18dBFS
< -3dBFS

Control LEDs

The control LEDs signal the current state of the control I/Os. The first four are input status indicators, and
the second four are output status indicators.
Amber
Relays are energized
Green
Above input threshold
Green
Signal above minimum but
below nominal threshold
> -48dBFS
< -19dBFS
Dark
Not active
VO-4 Front
Dark
Signal below
minimum threshold
< -48dBFS