nedis WIFILRC10E14 Guia De Inicio Rapido página 6

Installing the product (image B)
Control tile
1
Common functions
2
1. Screw the lamp into an E14 fitting.
2. Turn on the lamp.
3. In the Nedis SmartLife app, tap + B
4. Under Search Device, select the lamp from the list
of available devices.
5. Check if the lamp is blinking. If so, tap to confirm.
If the lamp does not blink, turn the lamp off and
4
on 3 times and check again.
6. Enter the password of the 2,4 GHz Wi-Fi network to
which your phone is connected and tap Confirm.
The Nedis SmartLife app will now search for the
lamp.
7. Rename the lamp after it has been found and
added.
If the regular connection method fails, the lamp
4
can be connected using AP mode:
a. Tap + B
b. Select the lamp from the list of available devices.
c. Select AP Mode in the top right corner.
d. Turn the lamp off and on 3 times and check that
the light starts blinking slowly.
e. Follow the steps in the application.
Using the product
The product can be controlled from any distance using
the Nedis SmartLife app.
The home menu of the Nedis SmartLife app shows a
control tile for each connected lamp and/or group.
The product can be connected to Google Home
4
or Amazon Alexa to enable speech control.
The product can be connected to IFTTT to enable
4
external conditions to trigger the lamp.
3 .
Add product
3
On / off button
4
3
6
.