Handicare Coral 3002010000 Manual De Instrucciones página 7

Assembly
Coral commode/shower stools
3002010000, 3002010100
1
1. Position the leg with cover
(2x) on the seat. Make sure
that all pins of the seat fully
protrude the leg and the
cover.
4
4. Mount the safety lock (2x) on the
protruding pin.
Make sure that both safety locks are
screwed on tightly.
7
Applicable for commode seat: 3002010000
7. Place the rear pin of the toilet rail (2x)
into the rear keyhole in the base plate.
Push forward until it snaps in place.
M A N U A L
2
2. Make sure that the leg and
cover (2x) are well fitted in the
seat. Lay this part on a table
for easier assembly of the other
parts.
5
5. Mount the safety key (2x) between the
clickers at the back of the stool.
Push downwards until it snaps in place.
8
Applicable for commode seat: 3002010000
8. Rotate the toilet rail until the front
pins align with the front keyholes. Push
outward until it snaps in place.
3
3. Slide the base plate over the
front legs.
Make sure that the rear pins of
the seat fully protrude the base
plate. Push the base plate onto
the seat until all clickers snap
into place.
6
6. Slide the height adjustment tube
into the leg (4x).Adjust to the correct
height and click the E-clip through
the chair leg and height adjust-
ment tube. Make sure the legs are
mounted at the same height.
9
9. Turn the stool upright.
Make sure that all parts are
in place and secured.
English
7