Oki IP-7900-26 Guía De Consulta Rápida página 14

11
Remove the tension bar from the tension
bar hook.
12
Loosen the knob screw of each tension bar
hook and extend it laterally.
Knob screw
Tension bar hook
13
Set a dolly under the media and lift the
media to remove it.
Recommended dolly
Media
<Media at the supply side>
1
Set the printer to the offline state by pressing
the key.
O N L I N E
á I N K M E D I A R E G â
ß M E D I A M . A D V à
2
Press the key.
The TUR's take-up switch is activated by selecting
media.
3
Lift the slackened part and remove the tension
bar at the supply side.
Printer rear (supply side)
<Media in general>
Tension bar
Switch
Peel roller
Scroller
Tension bar
4
5
6
Peel roller
L (light) size tension bar
<Vinyl chloride media>
Caution
- Do not ratate the peel roller, or the printer may be
damaged.
Rotate the pressure control knob in the arrow
direction to raise the pressure roller.
Takeup side
or
Pressure control knobs
Rotate the scroller manually to take up the
media.
Remove the scroller of the printer.
Roller groove
Supply side
Printer rear (supply side)
Scroller
13