Installation - cabstone TV EASYFIX ULTRA SLIM Manual

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Manual
wall. If the structure of your wall is different, corresponding installation material must be
used. In any case, consult a specialist.
Make sure to observe the correct thread size during installation of the display screen to
the wall bracket.

5 Installation:

Wall Installation:
Step 1
Please use the wall bracket as a template to mark the
position of attachment to the wall.
Please observe the distance between wall bracket
disks, it must be at least 180 mm and may be
maximum 220 mm.
Check if water or gas pipes, or power lines are behind
the wall before drilling! Use a 8 mm stone drill to bore
the holes with a depth of 40mm. Insert wall dowels (B)
into the 2 drilled holes, use screws (A), and washers
(F) to attach the wall bracket disks. Please observe
the distance between wall bracket disks, it must be at
least 180 mm and may be maximum 220 mm.
Attaching Screen Holders to the Rear Side of
Step 2
the Display Screen
Use screws (C), spring washers (G), and washers (E)
to attach the mounting rope to your LED/LCD/plasma
display as illustrated in Figure 2. If you have a display
screen with curved rear side, please proceed as
illustrated in Figure 3. Use screws (D), spring washers
(G), washers (E), and spacers (H) to attach the rope.
M8 x20 and M8 x 40 screws are supplied, other sizes
must be purchased from a specialty shop. Attach the
spacer as illustrated in Figure 4, to replace audio/
video cables, or plug them into a different socket of
your display screen. When attachment of cables is
done, you can remove or swing down the spacer.
Hooking Up:
Step 3
Now, hook the display screen onto the wall bracket as
illustrated in (Fig. 5).
The installation is completed. For disassembly the steps must be carried out in
note:
reverse order.
10
Tabla de contenido
loading

Este manual también es adecuado para:

52085

Tabla de contenido