Beper P204FER003 Manual De Instrucciones página 10

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Steam Iron Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Use advice
Make sure that the mains voltage corresponds to the data specified
on the rating label.
If the cord supply or plug are damage, or in case of electric shock,
do not use the iron but make it repaired by an authorized assistance
centre.
When using the iron for the first time remove the protection from the
soleplate, if necessary use a soft cloth. Pay attention to do not scratch
the soleplate with metallic object, as well as zip, buttons, etc.
When use the iron for the first time the soleplate may diffuse a light
smoke caused by evaporation of protective oil used in factory; that is
not dangerous and smoke will disappear after some use.
The power cable must always be free from knots or tangles.
Never pull the supply cord to unplug the appliance.
Do not roll up the electric cord around the iron.
Keep away to a reasonable distance the supply cord from the iron
plate, especially when it is hot.
When making a break or if not used, put the iron in vertical position.
The plate of the iron becomes very hot so take care not to
burn yourself.
Always choose the most suitable temperature for the cloth to iron.
Do not use the iron as a heater. Do not subject the iron to shocks.
Before cleaning, always unplug the power cord.
If you decide not to use the product any longer, you must place it
away from children and in order not to create any danger.
10
Tabla de contenido
loading

Tabla de contenido