Technical Information - Hansgrohe Raindance S 100 3-Jet 043410 Serie Instrucciones De Montaje / Manejo / Garantía

Raindance S 100 3-Jet
04341XX0
Raindance E 100 3-Jet
04344XX0
Raindance C 100 3-Jet
04345XX0
 WATERSENSE® is a registered mark of the U.S.
Environmental Protection Agency
English

Technical Information

Max. flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Important
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
A11.18.1-005
complete the installation.
CSA B15.1-005
• The use of enhanced water efficient
shower heads (restricting water flow
below 2.5 gpm @ 80 psi) may result
in unexpected temperature changes
that might startle – or could even
burn – the bather if the water supply
pressure changes. Water supply
pressure changes can occur due to
things like toilet flushing and washing
machine or dishwasher operation.
• Install only with a compensating valve rated
for this shower head's flow rate.
• After installation, test the effect of adding
this shower head to your plumbing system.
While running your shower, activate each
water-demanding appliance in the home
(toilet, dishwasher, clothes washer, etc.) and
see if the use of those appliances causes the
A11.18.1-005
temperature of the shower water to change
CSA B15.1-005
suddenly.
• Confirm that the water coming from the
shower head does not exceed 10° F. If the
temperature of the water changes suddenly
or exceeds 10°F, contact Hansgrohe at 800
334 0455 before using the showerhead.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
A11.18.1-005
CSA B15.1-005
.0 GPM