Important Safety Instructions - Bestway Kondor 3000 Set Manual Del Usuario

PLEASE CAREFULLY READ THIS MANUAL BEFORE USING YOUR INFLATABLE BOAT. KEEP IT FOR
FUTURE REFERENCE.
#61099; #61100
Boat Safety rope
#61062;#61102
Boat
Components:
• Repair Patch
• Inflation Scale
• Deflation Pipe
#61078
Boat
• Inflation Scale
Technical Specifications
Item 61078 / 61099
Inflated Size
1.55m x 93cm (61'' x 37'')
Maximum Weight
80 kg (178 lbs.)
Passenger Capacity
1 adult
Inflation Pressure
0.03 bar (0.5 psi)
Construction of the boat
Grab Rope
Pressure-Scale
Heavy Duty Handle
NOTE: 1.55m x 93cm (61'' x 37'') boats do not include heavy-duty handles and oar clasps.
NOTE: Drawings for illustration purpose only. Not to scale.
303021211258_21x28.5cm_#61102;#61062; #61078; #61099; #61100_英
Components:
• Inflation Scale
• Repair Patch
• Deflation Pipe
Oar Foot Pump
Only for #61062
Hand Pump
Only for #61102
Safety rope
Components:
• Repair Patch
Oar
• Deflation Pipe
Safety rope
61062 / 61100 61102
1.88m x 98cm (6'2'' x 39'') 2.32m x 1.15m (91'' x 45'')
120 kg (264 lbs.) 190 kg (418 lbs.)
1 adult +1 child 2 adults +1 child
0.03 bar (0.5 psi) 0.03 bar (0.5 psi)
Valve Rope Grommet
Oarlock
Inflatable Floor
Oar Clasp
Warning

IMPORTANT SAFETY INSTRUCTIONS

Follow all the Safety and Operating Instructions. If you don't follow these instructions, it may cause the boat to
overturn or explode and result in drowning.
1. Do not exceed the maximum recommended number of persons. Regardless of the number of persons on board,
the total weight of persons and equipment must never exceed the maximum recommended load. Always use the
seats/ seating spaces provided.
2. When loading the craft, never exceed the maximum recommended load: Always load the craft carefully and
distribute loads appropriately to maintain design trim (approximately level). Avoid placing heavy weights high up.
NOTE: The maximum recommended load includes the weight of all persons onboard, all provisions and
personal effects, any equipment not included in the light craft mass, cargo (if any) and all consumable liquids
(water, fuel, etc.).
3. When using the boat, life saving devices such as life jackets and buoys should be pre-inspected and used at all
times.
4. Before every use, carefully inspect all boat components including air-chambers, grab ropes, oars, and air valves,
to ensure everything is in good condition and tightly secured. If you find any damage, please stop to repair it.
5. Buckets, water scoops and air pumps should always be available in case of air leakage or if the boat takes on
water.
6. When the boat is in motion, all passengers must remain seated at all times to avoid falling overboard. Keep the
boat balanced. Uneven distribution of persons or load in the boat may cause the boat to overturn and result in
drowning.
7. Use the boat near the shore and beware of natural factors such as wind, tide waters and tidal waves.
BE AWARE OF OFFSHORE WINDS AND CURRENTS.
8. If one chamber is punctured when the boat is in the water, it may be necessary to fully inflate the other air
chamber to prevent the boat from sinking.
9. Be careful when landing on the shore. Sharp and rough objects such as rocks, cement, shells, glass, etc. may
puncture the boat. To avoid damage, do not drag the boat on rough surfaces.
10. When choosing an outboard motor, refer to the technical specifications section of this manual to determine
acceptable horsepower ratings.
11. For electrical motors equipped with batteries, note that battery acid can be caustic, which can cause damage to
both skin and boat materials.
12. For motors which use fuels such as gas, oil or petrol, since fuel is a flammable substance, it should be kept
away from open flames. Further, clean the boat material immediately if fuel spatters onto the boat surface. Be
aware of the potential harmful effects of liquids such as battery acid, oil or petrol. The liquids may damage your
boat.
13. Inflate according to the numbered air chamber and rated pressure of the boat, or it will cause over-inflation and
potential and boat explosion. Exceeding the data given on the capacity plate may cause the craft to be
damaged, overturn and lead to drowning.
14. If you use the tow rings to tow the boat, go slowly to avoid over-towing as damage may occur.
15. Know how to operate a boat. Check in your local area for information and/or training as needed. Inform yourself
about local regulations and dangers related to boating and/or other water activities.
SAVE THESE INSTRUCTIONS
Assembling of the boat
NEVER USE HIGH PRESSURE AIR TO INFLATE INFLATABLES. THIS CAN DAMAGE YOUR PRODUCT AND
VOID YOUR WARRANTY
• Inflate the air chambers with a HAND air pump.
An inflation scale is provided with the product. Inflate the product until the printed scale is charged up to the same
level as that of the supplied scale. (refer to the table and illustrations below)
Caution: Under and over-inflation of the boat will result in safety hazards. It is better to check the pressure of the
boat each time before use. If you use another pressure gauge, the boat pressure should not be more than the data
given on the builder's plate.
• Never stand on or rest objects on the boat during inflation.
• Inflate the bottom chamber and other accessories such as the seat until it is stiff to the touch, but NOT hard.
3