Original Operating Manual; General Safety Instructions - Festool MX 1600/2 EQ DUO Manual De Instrucciones

Original operating manual

1 Technical Specifi cations
Stirrer
Voltage
Frequency
Connected load
Idling speed
1st speed
2nd speed
Electronic speed
preselection
2-speed switch
Stirrer – max.
Clearence between
spindles
Collar –
Weight
Protection rating
2 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Read the operating instructions/notes!
Wear a dust mask!
Wear ear protection!
Wear protective gloves!
Do not throw in the household waste!

Advice or tip
3 Operating equipmen
[1-1] Stirrer (not included in the standard de-
livery)
[1-2] Tool mount
[1-3] Safety pin
MX 1600/2 EQ DUO
220 – 240 V
50 / 60 Hz
1500 W
100 – 250 rpm
130 – 350 rpm
•
•
140 mm
110 mm
57 mm
7,3 kg
II /
t
[1-4] Lock-off switch
[1-5] On/Off switch with speed control
[1-6] Auxiliary handle
[1-7] Speed selector switch
[1-8] Thumbwheel for speed pre-selection
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4 Intended use
The device is designed for mixing powdered mate-
rials, such as mortar, plaster, adhesives and non-
solvent paints, varnishes and similar substances.
The manufacturer accepts no liability for
possible damage or accidents caused by
using or operating the device inappropri-
ately or incorrectly.
5 Safety instructions
WARNING!
All applicable legal requirements concerning oc-
cupational safety must be adhered to, along with
the safety instructions that are cited in the section
"Safety instructions" and all other generally ap-
plicable health and working principles. The manu-
facturer accepts no liability for any damage that is
caused by unauthorised changes to the machine.
5.1

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
- Before starting up any tool, you must check
the fl exible power cable and the plug. You must
have any defects fi xed by a professional.
- Never touch the machine with wet hands when
it is connected to the power mains.
- The switch must be in the OFF position before
you connect it to the mains.
- The container with the material that is to be
mixed must be stabilised to prevent it from
slipping on the fl oor.
- Only use the tool until the stirring rod diameter
7
GB