Jensen VM8113R Instrucciones De La Instalación Y Operación página 15

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
VM8113R
To stop disc play and eject the disc, press the
panel down and then press the eject button (21).
NOTE: The unit is designed for play of standard 5" (12 cm.) discs only.
Do not attempt to use 3" (8 cm.) CD singles in this unit, either with or
without an adaptor, as damage to the player and/or the disc may
occur. Such damage will not be covered by the warranty on this
product.
Loading an SD Card
Open the panel and insert the SD card into the SD Card slot (23). Close the
panel and the unit will read the files on the card automatically.
To remove the card, first press the SRC button (6) to switch to another
mode and stop SD playback. Press the SD card to pop it out, and then
remove the card.
NOTE: The VM8113R supports up to 8GB SD cards.
Loading a USB Device
Insert the USB device into the USB connector (5) on the front of the unit.
The unit will read the files on the USB device automatically.
To remove the USB device, press the SRC button (6) to switch to another
mode and then remove the USB device from the USB connector.
NOTE: The USB port will recognize most USB flash memory devices
and portable hard drives (hard drives must be formatted to FAT32,
NTFS is not supported).
Notes on MP3/WMA Play
MP3 and WMA (Windows Media Audio) music files are digital audio files
that are compressed to allow more files to be stored. This unit can play
MP3/WMA and video directly from files contained on a CD-R/RW,
DVD+RW, DVD-RW, DVD+R, DVD-R and DVD-VIDEO, or an SD card or
button to flip the front
USB Device using the buttons on the receiver (or remote control) as
described below.
Many types of software are available for converting audio files into MP3/
WMA formats. Jensen recommends Nero or Roxio Easy CD Creator.
This unit can play MP3 (MPEG1, 2, 2.5 Audio Layer 3). However, the MP3
recording media and accepted formats are limited. When writing MP3/
WMA, pay attention to the following restrictions.
MP3 Playing Order
When selected for play, files and folders (Folder Search, File Search or
Folder Select) are accessed in the order in which they were written to the
media. As a result, the order in which they are expected to be played may
not match the order in which they are actually played. You may be able to
set the order in which MP3/WMA files are to be played by assigning file
names beginning with play sequence numbers such as "01" to "99". For
example, a medium with the following folder/file hierarchy is subject to
Folder Search, File Search or Folder Select as shown below.
The VM8113R player will only recognize three folder levels and does not
display folders containing only other folders. In the example above, the unit
will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain
any tracks directly. Folder 5 is not recognized at all since it is at the fourth
level.
11
Tabla de contenido

Solución de problemas

loading

Tabla de contenido