Beper P203TER200 Manual De Instrucciones página 10

Thermoventilateur Manuel d'instructions
Do not place the appliance immediately below a wall socket-outlet.
It is possible to hear a light noise during operation of appliance, espe-
cially during first use; these light noises are normal, and are caused
by the expansion and contraction of the new materials, due to hea-
ting and following cooling of the appliance.
Keep inflammable objects and materials (such as furniture, cushions,
blankets, paper, cloths, curtains, etc.) at least 1 meter away from the
appliance.
Keep air inlets and outlets free from objects and materials (distance
of at least 1 meter from front panel and 50 cm from the back outlets)
Do not leave the appliance operating unattended: make sure the ap-
pliance is off, and disconnect it from the wall socket.
Warning: the appliance is not equipped with a device to con-
trol the room temperature. Do not use the appliance in small
rooms, when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision
is provided.
Product description Fig. A
1. Handle for transportation
2. Ambient thermostat
3. Function selector
4. Functioning indicator
Operation
Connect the plug to a suitable wall socket. Turn the function selector to the desired function.
Thermostat
Turn the thermostat knob clockwise to increase the air emission (temperature) and to start the heating or the fan.
The operating lamp lights up. Turn the knob counterclockwise to decrease the temperature or turn off the heating
or fan.
Heating function
Select "I" in the function selector to obtain the minimum heat level (1000 Watts). Select "II" to get the maximum
heat level that can be set (2000 Watts).
Turn clockwise the thermostat knob to adjust the heat.
To reach the maximum heating level, select "2" and turn the thermostat knob clockwise.
Ventilation function
Place the function selector on
The Fan heater will emit fresh air.
Adjust the thermostat clockwise until the fan starts.
To switch off, position the function selector to the "0" position and rotate the thermostat counterclockwise.
Use the handle to carry or move the fan heater.
Maintenance and cleaning
The appliance does not need any particular maintenance. If necessary, clean the outer surface with a slightly
dampened soft cloth, and dry thoroughly.
(ventilation only).
10