Duronic Si3 Manual De Instrucciones página 10

4. Turn the control dial to the temperature you require.
5. Stand the iron on the silicone pad and wait for it to heat up. When it has
reached the set temperature, the indicator light will go off.
6. Iron your garment/fabric as you normally would.
7. If the water level goes low and you haven't yet finished ironing, unplug
the iron and refill it using the water jug provided. Then plug it back in and
commence with ironing.
8. If you need to put the iron down to handle the fabric, place the iron on the
silicone pad provided.
9. When you have finished ironing, turn the control dial to the MIN position.
Unplug it from the mains socket.
10. Stand the iron on the silicone pad and leave it to cool down. Once cool,
empty the water tank.
11. To store away, wrap the cable around the iron and secure with the cable
clip. Store away using the storage bag provided.
STEAM FUNCTION
The steam function is mainly used for thick materials or fabrics with stubborn
creases.
If you want to use the steam function, you will need to set the control dial to
the MAX setting.
Switch the steam button on and hold the iron horizontally for a few seconds to
allow the steam to flow through and clean the steam vents.
Place the iron onto the fabric and you will see the steam start to penetrate the
fabric as you continue to iron.
10