Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Honda Civic 2013-2015
KIT FEATURES
• ISO DDIN radio provision
Note: This kit will not retain the i-MID display
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (3) metal panel clips • D) (3) plastic panel clips
• E) (4) #8 x 3/8" Phillips truss-head screws • F) (9) #8 x 3/8" Phillips pan-head screws
• G) (3) #4 x 3/8" Phillips truss-head screws • H) (2) #8 x 1/2" Phillips pan-head screws
A
B
F
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for options
Antenna Adapter: • 40-HD11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • 8mm socket wrench
METRA. The World's best kits.
Installation instructions for part 95-7882B
95-7882B
C
D
G
H
E
metraonline.com
Table of Contents
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly
– ISO DDIN radio provision ...................................... 3
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
loading

Resumen de contenidos para Metra 95-7882B

  • Página 5 Instrucciones de instalación para la pieza 95-7882B Indice Honda Civic 2013-2015 95-7882B Desmontaje del tablero ..........2 Preparación del kit ..........3 Ensamble del kit CARACTERÍSTICAS DEL KIT – Provisión de radio ISO DDIN ......... 3 • Provisión de radio ISO DDIN...
  • Página 6 95-7882B Desmontaje del tablero 1. Abra la puerta de la cavidad debajo (Figura D) del radio, retire los (2) tornillos Phillips expuestos, y después retire la cavidad. (Figura A) 2. Quite los (2) tornillos Phillips del borde inferior del radio. (Figura B) 3.
  • Página 7 (Figura A) el tablero y haga todas las conexiones necesarias al radio. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Vuelva a conectar la terminal negativa ubicación de la batería y pruebe el radio para...
  • Página 8 Instrucciones de instalación para la pieza 95-7882B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...