Ocultar thumbs Ver también para 95-7877:
Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS FOR PART 95-7877
Honda Fit 2009-up
KIT FEATURES
• Double DIN radio provision
• Painted to match factory dash
95-7877S – Silver
95-7877B – Matte Black
KIT COMPONENTS
• A) Radio Housing • B) Double DIN Brackets • C) Double DIN Trim Plate
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 Toyota Harness 1987-up • TYTO-01 Toyota amp interface 2003-up
Antenna Adapter: • Not Required
METRA. The World's best kits.
APPLICATIONS
95-7877
C
1-800-221-0932
Dash Disassembly
– Honda Fit 2009-up ............................................... 2
Kit Assembly
– Kit preparation ..................................................... 3
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket Wrench
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Table of Contents
Tabla de contenido
loading

Resumen de contenidos para Metra 95-7877

  • Página 5: Componentes Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7877 APLICACIONES Indice Honda Fit 2009 y más recientes 95-7877 Desmontaje del tablero – Honda Fit 2009 y más recientes ......2 Ensamble del kit CArACtEríStICAS dEL kIt – Preparación del kit ..........3 •...
  • Página 6: Desmontaje Del Tablero

    95-7877 Desmontaje del tablero 1. Desenganche y quite el panel 4. Quite (2) tornillos Phillips que central inferior de debajo del radio. sujetan el interruptor de las luces (Figura A) intermitentes a la parte posterior del panel del radio de fábrica.
  • Página 7: Ensamble Del Kit

    Provisión de radio doble DIN Preparación del kit 1. Ubique el arnés de cableado 1. Sujete el interruptor de las luces de fábrica en el tablero. Metra intermitentes al panel de la recomienda el uso de un adaptador carcasa del radio con la tornillería adecuado de acoplamiento de de fábrica.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7877 EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...

Tabla de contenido