H-8041
COMPACT AUTO
FLOOR SCRUBBER
OPERATING ISSUE
The machine does not work.
The brush does not rotate.
The machine does not
clean evenly.
No detergent is delivered.
The suction motor does not
start.
PAGE 1 OF 9
1-800-295-5510
uline.com
TROUBLESHOOTING
CAUSES
The batteries need to be charged.
The brush button LED is off.
The brush motor thermal cutout has
tripped; the motor has overheated.
The batteries need to be charged.
The brush motor fuse has blown.
The brush or floor cleaning pad is
worn.
The detergent button LED is off.
The detergent tank is empty.
The brush motor is off.
The hose delivering the detergent
to the brush is blocked.
The detergent tap is dirty or faulty.
The in-line filter is dirty (Left side
from operator's position near the
wheel).
The fan button LED is off.
The vacuum motor fuse is blown.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
RECOMMENDATIONS
Charge the batteries.
(See Instructions)
Press the brush button.
Turn the unit off. Let the machine
cool down for at least 45 minutes.
Charge the batteries.
Replace the brush motor fuse.
Replace the worn brush or floor
cleaning pad.
Press the detergent button.
Fill the detergent tank.
Turn the motor on by pressing the
brush button.
Unblock and open the detergent
tank tap.
Have the detergent tap cleaned or
replaced.
Clean the filter. Make sure to close
the detergent tap prior to cleaning.
Press the fan button.
Replace the vacuum motor fuse.
0321 TH-8041