Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Contents
Approval Conditions
This Deckvest is approved to ISO 12402-2 275N and 2010 SOLAS MSC 200 (80). It is
important to get into the habit of wearing your Deckvest. It is comfortable, safe and a
pleasure to wear.
A lifejacket only works correctly if it is fitted and secured correctly.
Inflatable lifejackets only become buoyant when inflated: they contain no inherently
buoyant materials.
As user, it is your personal responsibility to understand the operation and maintenance
requirements of your inflatable lifejacket and be familiar with its limitations.
Minimum buoyancy 275N
Re-arming your Duro SOLAS
Remove cylinders and old firing caps by unscrewing anti clockwise.
Check firing mechanism moves freely and is free from any contamination replace first the
cap and then the cylinder, ensuring a secure fit.
Inflating your Duro SOLAS
It is recommended that the following inflation procedures are followed:
1. MANUAL INFLATION
To manually inflate the lifejacket, sharply pull either rubber handle downwards. The
CO
gas cylinder should inflate the bladder within seconds.
2
2. ORAL INFLATION
To inflate the lifejacket by mouth, locate the oral inflation tube by opening the zip at
the yellow breakout point on the front panel of the lifejacket. Then after removing
the end cap, blow into the tube until the lifejacket is fully inflated.
3. AUTOMATIC INFLATION
Inflation should occur automatically within seconds of the inflator being submerged.
The automatic capsule is designed to activate a sprung pin to puncture the CO
cylinder and inflate the bladder.
Page no:
3-4
5
6
6
6-7
7-8
7
9-41
42
2
6
Tabla de contenido
