Sensor CBU-PIRDALI-N
Wiring diagram
Use the relay output for non-dimmable loads
and the dimmable output for DALI luminaires.
N
3
L
Profiles CBU PIRDALI-N
Profile name
Profile description
EBDSPIR-CB-DD
Default mode
EBDSPIR-CB-DD
Automation control only
(@ on DALI only)
affects the DALI output.
The relay output is only
controlled manually
EBDSPIR-CB-DD
DALI type 8 master dim
DT8 W-C
(Warm < > Cold)
EBDSPIR-CB-DD
DALI type 8 master dim,
DT8 TW
(Warm < > Cold)
EBDSPIR-CB-DD
DALI type 8
DT8 RGB
master dim, color,
saturation + color chart
EBDSPIR-CB-DD
Master dim,
DT6 TW
(Warm < > Cold)
EBDSPIR-CB-DD
DALI type 6 RGB
DT6 RGB
& master dim
EBDSPIR-CB-DD
DALI 2-channel dimming,
DALI 2 ch
2 sliders
EBDSPIR-CB-DD
DALI 3-channel dimming,
DALI 3 ch
3 sliders
EBDSPIR-CB-DD
DALI 4-channel dimming,
DALI 4 ch
4 sliders
Hilma Anderssons gata 15 | 421 31 Västra Frölunda | +46 (0)31-23 56 00 | [email protected] | [email protected]
N
1
L'
L
2
DALI device
DALI
Relay output
type
Addressing
is affected by
DALI output
Type 0
Not any
Yes
Type 0
Not any
No
Type 8
0: Warm white
Yes
1: Cold white
Type 8
0: Warm white
Yes
1: Cold white
Type 8
0: Red
Yes
1: Green
2: Blue
Type 6
0: Warm white
Yes
1: Cold white
Type 6
0: Red
Yes
1: Green
2: Blue
Type 6
0: Channel 1
Yes
1: Channel 2
Type 6
0: Channel 1
Yes
1: Channel 2
2: Channel 3
Type 6
0: Channel 1
Yes
1: Channel 2
2: Channel 3
3: Channel 4
www.vadsbo.net
1. Neutral
2. Phase
3. On / Off load
4. DALI luminaire
DALI
DALI
Comments
The relay output is affected
by DALI output values
The relay output works independently
and does not respond to dimming
values at the DALI output
Preset "dim to warm" - feature.
Warm with a little light and cold
at very light
Adjust dimming level and
light temperature separately
Color can be defined with both
saturation and color chart
Adjust dimming level and
light temperature separately
Color can be defined with both
saturation and color chart
Automatically assigns addresses. See
to use the same number of devices that
the profile is intended for (2 pcs)
Automatically assigns addresses. See
to use the same number of devices that
the profile is intended for (3 pcs)
Automatically assigns addresses. See
to use the same number of devices that
the profile is intended for (4 pcs)
N
4
L
