Gessi MIMI 36537 Manual De Instrucciones página 2

Tabla de contenido
1 - WARNING!! PLEASE TAKE NOTICE THAT the suggested maximum pressure and/or
temperature MUST NEVER BE EXCEEDED, as it may damage and/or cause ruptures and/or
leakages and/or even break the product, and present a potential hazard and danger to safety,
health and/or property. Following are the technical data with respect to the installation of Gessi
plumbing products.
► W orkingpressureshouldnotbelowerthan0,5bar(7,25psi)andnotbehigherthan5bar(72
Psi).Incaseofhigherworkingpressureuseapressurereducervalve.
►Maximumtestinstallationpressure:8bar(116psi).
► A voidmajorpressuredifferencesbetweenhotandcoldwatersupply.Differencesinpressure,
water with high mineral content, and soapy substances can corrode the internal and external
parts of the hoses and slowly weaken the materials thereby causing leakage.
►MaximumworkingtemperatureforGessiproductsis70°C(158°F).
2 - WARNING!! PLEASE TAKE NOTICE THAT the product should never be used as a tool,
hammer or for any purposes other than the one it has been designed for.
3 - WARNING!! PLEASE TAKE NOTICE THAT the product should always be installed and tested
by a professional plumber.
4 - WARNING!! For product installation, please refer to the LOCAL PLUMBING CODE.
5 - WARNING!! PLEASE TAKE NOTICE THAT electric cables should never be attached to the
product as they may present a health and safety hazard.
6 - WARNING!! PLEASE TAKE NOTICE THAT heavy objects should never be placed on or
dropped on the product as they may damage the same and cause splinters, which may
present a health and safety hazard.
7 - WARNING!! PLEASE TAKE NOTICE THAT the instructions manual should carefully read
before installation and the installation procedure provided therein must be properly followed
and complied with.
8 - WARNING!! PLEASE TAKE NOTICE THAT during installation the use of excessive force
should be avoided in order to prevent damage to the product and/or its components and
pieces. NEVER force a component or piece into another. NEVER force screws or over tighten
screws.
CAUTION - WARNING
2
Tabla de contenido
loading

Tabla de contenido