Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
INSTALLATION AND CONFIGURATION
CONFIGURATION MENU
Once the unit is connected, follow the next procedure to access the configuration menu:
1. To Access the configuration menu, press and hold both the SET and ENTER buttons simultaneously until the display
shows "LOCAL SETUP"
2. Then, "ADD" is displayed on the screen to indicate that the local address can be set. Automatically a counter is
displayed. The count is incremented from one to 126. When the desired address number is displayed, press ENTER
to confirm the number. If you want to reset the counter, press SET.
3. Once the address is confirmed, "E.O.L" is displayed on the screen to set the end of line resistor. "ON" (led "E.O.L"
on) or "OFF" (led "EOL" off) is displayed according to the last saved status. To change the status, press the "SET"
button and then press ENTER to confirm.
4. "MODE" is displayed on the screen to set the display mode during a transaction. To change the mode, press SET
until the desired mode, "STD" (standard) or "XXL" are displayed. Once the mode is set, press "ENTER" to confirm.
5. "OK!" is displayed on the screen and the unit restarts showing the standby screen.
LED AND DIAGNOSTIC INDICATORS
In the "standby" mode, the firmware version installed on
the unit and the supply voltage are displayed on the
screen by pressing the "SET" or "ENTER" button.
LED
DESCRIPTION
ONLINE
Led on indicates that the device is
(1)
correctly connected to the installation.
E.O.L
Led on indicates that the terminating
(2)
resistor is activated.
SPECIFICATIONS
POWER SUPPLY VOLTAGE
CAN BUS CONNECTIONS
STATUS LEDS
WEIGHT
INFORMATION ON WASTE PRODUCTS
The symbol above means that according to local laws and regulations your product and/or its
battery must be disposed of separately from household waste. When this product reaches its end of
life, take it to a collection point designated by local authorities. The separate collection and recycling
of your product and/or its battery at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the environment.
4
838 850 R. 06/18
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
24 V AC/DC
2
2
0,5 kg (1.1 oz)
1
2
144 mm
(5,7")
65 mm
(2.5")
194 mm
(7.6")
Tabla de contenido
