Asus T4 Serie Manual De Instalación página 8

Installing an optical drive
1. Place the chassis upright.
. Insert the SATA/IDE optical drive
to the upper 5.5 in drive bay, then
carefully push the drive until its
screw holes align with the holes on
the bay.
3. Secure the optical drive with four
screws on both sides of the bay.
4. Connect the SATA/IDE (4A) and
power plugs (4B) to the connectors
at the back of the SATA/IDE drive.
Reinstalling the cover
1. Fit the cover tabs with the chassis
rail and the front panel tabs (1A),
then lower the rear edge of the
cover as shown (1B).
. Secure the cover with three screws.
8
SATA
4A
4B
Installation manual

3
IDE
4A
1B

1A
4B