Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FLOOR LAMP
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
These instructions are provided for your safety.
Please read carefully and completely before beginning
the assembly and installation of this lighting fixture.
This lighting fixture is intended for indoor use only.
Always place lighting fixture on a solid, level surface.
For use with E26 (medium) base light bulbs only.
To avoid the risk of fire, do not exceed the maximum wattage of 100W incandescent bulb
or 9W LED bulb
(Bulbs not included)
This lighting fixture has a polarized plug (one prong is wider than the other) as a safety
feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Never use with an extension cord unless plug can be fully inserted.
Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS:
To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug
this lighting fixture and allow it to cool before attempting to replace the light bulb.
Do not touch light bulb while fixture is turned on.
Keep flammable materials away from this lighting fixture.
Never look directly at a lit bulb.
CARE INSTRUCTIONS:
Unplug lamp before cleaning.
Wipe clean with a soft, dry cloth or static duster.
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture's finish
Made in China
, or 23W fluorescent (CFL) bulb
, or 9W self-ballasted LED bulb
1
,
.
FL0335 rev112219EFS
Tabla de contenido
loading

Resumen de contenidos para Henn&Hart FL0335

  • Página 5: Lámpara De Piso

    LÁMPARA DE PISO Guarde estas instrucciones INSTRUCCIONES IMPORTANTES DE SEGURIDAD: • Estas instrucciones se proporcionan para su seguridad. Léalas cuidadosamente y por completo antes de comenzar a ensamblar e instalar esta lámpara. • Esta lámpara está destinada a ser utilizada solo en interiores. • Coloque siempre la lámpara sobre una base firme y nivelada. • Para utilizar con bombillas con una base E26 (mediano) solo. Para evitar el riesgo de incendios, no exceda el vataje máximo de una bombilla de • 100W incandescente , LED de 9W , fluorescente (CFL) de 23W , o LED balasto...
  • Página 6: Antes Del Ensamblado

    ANTES DEL ENSAMBLADO: Retire con cuidado todas las piezas y herramientas de la caja, junto con todo el envoltorio plástico protector. No deseche nada hasta después de haber terminado de ensamblar para evitar botar por accidente piezas pequeñas o herramientas. PARTES INCLUIDAS: (A) Base (B) Poste inferior (C) Poste central (D) Perilla de ajuste de altura (E) Pantalla/Poste superior (F) Interruptor encendido apagado Para utilizar con bombillas con una base E26 (mediano) solo.

Tabla de contenido