Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
TABLE LAMP
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
•
These instructions are provided for your safety.
Please read carefully and completely before beginning
the assembly and installation of this lighting fixture.
•
This lighting fixture is intended for indoor use only.
•
Always place lighting fixture on a solid, level surface.
•
For use with E26 (medium) base light bulbs only.
To avoid the risk of fire, do not exceed the maximum wattage of 60W incandescent bulb
•
or 9W LED bulb
(Bulbs not included)
•
This lighting fixture has a polarized plug (one prong is wider than the other) as a safety
feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Never use with an extension cord unless plug can be fully inserted.
Do not alter the plug. Do not attempt to bypass this safety feature.
WARNINGS:
•
To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this
lighting fixture and allow it to cool before attempting to replace the light bulb.
•
Do not touch light bulb while fixture is turned on.
•
Keep flammable materials away from this lighting fixture.
•
Never look directly at a lit bulb.
CARE INSTRUCTIONS:
•
Unplug lamp before cleaning.
•
Wipe clean with a soft, dry cloth or static duster.
•
Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the fixture's finish
Made in China
, or 13W fluorescent (CFL) bulb
, or 9W self-ballasted LED bulb
1
TL0291 TL0292 rev101119EFS
,
.
Tabla de contenido
Manuales relacionados para Henn&Hart TL0291
Resumen de contenidos para Henn&Hart TL0291
-
Página 5: Lámpara De Mesa
LÁMPARA DE MESA Guarde estas instrucciones INSTRUCCIONES IMPORTANTES DE SEGURIDAD: • Estas instrucciones se proporcionan para su seguridad. Léalas cuidadosamente y por completo antes de comenzar a ensamblar e instalar esta lámpara. • Esta lámpara está destinada a ser utilizada solo en interiores. • Coloque siempre la lámpara sobre una base firme y nivelada. • Para utilizar con bombillas con una base E26 (mediano) solo. Para evitar el riesgo de incendios, no exceda el vataje máximo de una bombilla de • 60W incandescente , LED de 9W , fluorescente (CFL) de 13W , o LED balasto incorporado de 9W . (Bombillas no incluidas) •... -
Página 6: Antes Del Ensamblado
ANTES DEL ENSAMBLADO: Retire con cuidado todas las piezas y herramientas de la caja, junto con todo el envoltorio plástico protector. No deseche nada hasta después de haber terminado de ensamblar para evitar botar por accidente piezas pequeñas o herramientas. PARTES INCLUIDAS : (A) Pantalla (B) Portalámparas/soporte (C) Base de la pantalla (D) Tuerca (E) Base (F) Interruptor encendido/apagado Para utilizar con bombillas con una base E26 (mediano) solo. Mostrado: A19 Estándar...