Safety Notes; Important Notes; Functions - marklin BDylf 457 Manual Del Usuario

Safety Notes

• This car is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital,
DCC or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• This model is larger than the customary European loading
gauge. It swings out quite a ways, chiefly on curves.
Please check before using this model for the first time,
to make sure that it can operate on your layout without
hitting signals, catenary masts, bridge railings, tunnel
portals, etc.
• Only one pickup shoe may be used in a car consist with
current-conducting couplers.
• The 7203 coupler must be used at the end and beginning
of a train consist with. Danger of short circuit!
See also Page 22.
6
• Please see your authorized Märklin dealer for repairs or
spare parts.
• Disposing: www.maerklin.com/en/imprint.html

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: BDylf 457 DB
• Address set at the factory: MM 68 / DCC 03
• Various controllable functions.
• Controllable current-conducting coupler for supplying
power to other cars (maximum load 200 milliamps).
Note:
The digital protocol with the most possibilities is the highest
order digital protocol. The sequence of digital protocols in
descending order is:
Priority 1: mfx
Priority 2: DCC
Priority 3: MM
If two or more digital protocols are recognized in the track,
the decoder automatically takes on the highest value digital
protocol.For example, if mfx & MM are recognized, the mfx
digital protocol is taken on by the decoder. Individual proto-
cols can be deactivated with Parameter CV 50.