Before The First Use; Cleaning And Maintenance - Kiwi kht-8453 Manual De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12

BEFORE THE FIRST USE

Assembly (FIGURE 1.)
• Turn the appliance upside down and place it on a soft surface to prevent, scratching of the
housing.
• Screw off the wing nuts from the U-shaped bolt, en place the U-shaped bolt between the
most outer fins with the threaded ends pointing upwards.
• Place the castor mounting plate over threaded ends of the U-shaped bolt and screw on the
wing nuts.
• Screw off the nuts from the castors and insert the threaded ends of the castors through the
holes in the mounting plate now screw the bolds back on.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
• When the device is turned on for the first time, a slight odor will occur. This is normal, ensure
adequate ventilation. This fragrance is only temporary and will disappear soon.
USE
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the
device matches the local voltage before connecting the device. Voltage 220V-240V 50Hz).
Power switches
Left switch: position 1 - Right switch: position 2 - Both switches: position 3
Thermostat knob
To set the required room temperature: turn the knob to the right as far as it will go and wait
until the required temperature has been reached. Turn the knob then slowly back again until
the control lamp has been extinguished. The position of the knob now corresponds to the
required temperature.

CLEANING AND MAINTENANCE

• Unplug the appliance and allow it to cool down. Use a soft, slightly damp cloth to wipe
appliance surfaces. Do not allow water or any other liquid to get into the unit.
• Do not immerse the appliance in water or any other liquid.
• Clean the air suction opening from time to time with a fine brush.
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability, but must be
offered at a central point for the recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your attention to this important issue. The
materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute
an important push to the protection of our environment. Ask your local authorities for information
regarding the point of recollection.
KHT 8453 Instruction Manual
5
Tabla de contenido
loading

Tabla de contenido