Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fax +32 030 9904733
•
R
emove the plug from the power outlet if the equipment is not turned on, even if storing
for a short period.
•
D
o not insert objects or pieces of paper between the blades.
•
D
o not use the device if oine of the blades is faulty; have it checked by a qualified
technician.
•
T
his device is not designed for continuous operation. It is therefore necessary to take
regular breaks during operation. See the chapter "Operation" in this manual.
•
I
f the power cable is damaged, it must be replaced by the manufacturer or its technical
assistance centre or by someone who is similarly qualified, in order to prevent any risks.
•
I
f there is a fault or the appliance is not working correctly, switch it off and have it
checked by a qualified professional. Repairs done by an unqualified person can be
dangerous and cause the guarantee to become void.
•
S
hould the appliance fail or not work correctly, disconnect the electric cable
immediately. Check that it is not damaged, and thereafter turn it back on: if in any doubt,
consult a qualified professional.
•
D
o not touch the appliance with wet hands or feet.
•
T
his appliance is not intended to be operated by means of an external timer or a separate
remote control system in order to avoid the risk of fire where the appliance is covered or is
not positioned correctly. Check that other devices with high power consumption are not
connected on the same circuit.
•
T
he plug point must be easily accessible so as to easily remove the plug in case of an
emergency.
INSTALLATION
• After unpacking, check the integrity of the appliance; if in doubt, do not use and contact a
qualified technician. The packaging materials (plastic bags, polystyrene, metal staples,
etc.) must not be left within reach of children, as they constitute possible sources of
danger.
• Before connecting the device, check that the voltage values on the data plate match with
those of the electric system. In the event of incompatibility between the power socket and
the device plug, have the plug replaced with a suitable model by a qualified professional,
who should ensure that the size of the cable is suitable for the power absorbed by the
device. The use of adaptors or extensions is generally not advisable; if it is necessary to
use them, they must comply with safety regulations and the total current (amps) must not
be rated lower than the maximum current of the the appliance.
• Before each use, ensure that the appliance is in good order, that the power cable is not
damaged: if you have any doubts, consult a qualified professional.
• Ensure that the power cable is correctly positioned and does not come into contact with
hot parts or sharp edges, or become wound around the device itself and is not twisted.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
10
40
/
Assembly page 10/40
Tabla de contenido
