Incorrect Operation - Yale Tigrip TTT Serie Manual De Instrucciones

I O
NCORRECT PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads within the specified jaw capacity must be picked up.
The load must never be less than the min. load, as otherwise the clamping force required for
safe transport will not be reached.
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
Only one girder, plate or profile may be transported at a time with the load lifting attachment.
It is forbidden to apply lateral tensile forces with an inclination angle of more than 15° to the
load lifting attachment.
Always insert the load fully into the mouth of the clamp.
Zu
close
fermée
Do not use the latching lever for attaching and lifting loads.
Do not allow the load lifting attachment to fall from a large height.
The unit must not be used in potentially explosive atmospheres.
©
2016 Columbus McKinnon Industrial Products GmbH
15