Operation
1
Locking and unlocking the lid
IMPORTANT:
not lock the drawers. See step 2 for securing the drawers.
□ Insert the key (K) into the lock and turn one quarter turn
counterclockwise to lock.
□ Remove the key (K).
□ Insert the key (K) into the lock and turn one quarter turn
clockwise to unlock .
□ Remove the key (K).
K
3
Removing/Installing the drawers
Removing the drawers -
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the release lever on
both sides so the slides can ride over the stops .
Pull out to remove.
Installing the drawers -
□
Pull the slides and slide carrier out until fully extended.
Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□
Slowly push the drawer until it is fully closed to
engage the slide .
□
Open the drawer and close it to verify proper operation.
The key will only lock the top lid and does
2
Securing the drawers
IMPORTANT:
locking / unlocking the unit.
□ To lock the drawers: Move the locking lever down and pull on
the drawers to ensure all drawers are secured.
□ To unlock the drawers: Move the locking lever up and to the
right to secure the lever in the open position.
4
Lifting/Lowering extendable side table
□ Lift the extendable side table to raise into position and push it
down. Make sure it is locked to the mechanism properly .
□ Lower the extendable side table when not in use. Pull it up first
and let it down slowly.
9
Pleas e contact 1-888-HD-HUSK Y fo r furthe r assistanc
The drawers must be fully closed before
HUSKYTOOLS.COM
e
.