Operation - Husky HOTC4412BN1S Guía De Uso Y Mantenimiento

Operation

1
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (J) into the lock cylinder (K)
and turn it 1/4-turn to the left. Then remove the key.
□ To unlock the unit, nsert the key (J) into the lock cylinder (K)
and turn it 1/4-turn to the right. Then remove the key.
J
3
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
2
Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the
release lever on both sides so the slides can ride over
the stops. Pull out to remove.
4
Lifting/Lowering extendable side table
□ Lift the extendable side table (S) to raise into position and
insert it's supporting leg into the holder (R). Make sure it is
locked to the mechanism properly .
□ Lower the extendable side table (S) when not in use. Pull it and
it's supporting leg up first and let it down slowly.
S
9
Pleas e contact 1-888-43-HUSK Y fo r furthe r assistanc
S
HUSKYTOOLS.COM
. e