Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE OF THE PSX2
Note: If the maximum pressure of the item being inflated is not known,
then allow the compressor to run only until the desired fullness is reached.
Over-inflating an item could result in damage to the PSX2 or the item being
inflated. Never leave the compressor running unattended.
Operating 12V DC appliances
To power a 12V DC appliance with your PSX2 please follow these steps:
• Plug in appliance to the 12V outlet
•
Turn on appliance
•
After use is completed, turn off appliance, unplug appliance from the unit
•
Re-charge the PSX2 as soon after use as possible
•
Check the battery voltage regularly when using the 12V outlet. Do not allow
the battery voltage to drop below 11V before recharging or damage to
the battery can occur.
Notes:
• The 12V DC outlet is always on. No other switches need to be on to use this outlet.
• The combined load should not exceed 15 Amps. Outlet will switch off automatically if
overloaded.
• The PSX2 will NOT automatically turn off power to the DC outlet. Continuing to use 12V
DC appliances after the battery has been depleted can permanently damage the unit.
• Do not operate 12V DC appliances while charging your PSX2. Doing so may damage the
unit and/or your DC appliance.
• 12V DC appliances vary greatly according to the amount of power they consume. The
wattage consumed by a 12V DC appliance will impact the length of time the PSX2 will
operate the appliance before the need to recharge the PSX2. The greater the wattage
consumed, the lesser the duration of the PSX2 battery charge. The 12V DC outlet is
equipped with an internal circuit breaker which will automatically cut power to the outlet
if: the DC appliance causes a direct short or if the appliance draws excessive amperage.
This circuit breaker is designed to automatically reset once the fault has been corrected
and the breaker has cooled to a normal operating temperature.
REPLACEMENT PARTS
The following replacement parts are available for the PSX2:
PART
NUMBER
RSPS151
RSPS152
RSPS155
Only parts identified by part number are available for purchase.
If you experience any problems with the PSX2, please DO NOT return
the unit to the place of purchase. Please call PowerStation's Technical
support staff between the hours of 8:30 AM to 5:30 PM Eastern
Standard Time toll free at 1-800-837-5994.
030211
DESCRIPTION
120V AC power cord
12V DC power cord
Inflation accessories
continued
PSX2 Owners Manual Page 13
Capítulos
Tabla de contenido
