Using The Integrated Work Lamp; Operating 12V Dc Appliances - PowerStation PS1118 Manual Del Usuario

USE OF THE PS1118

Using the integrated work lamp

To use the integrated work lamp, simply press the work lamp power button on the
front of the unit (see Figure 1 on page 4 for location E).

Operating 12V DC appliances

To power a 12V DC appliance with your PS1118 please follow these steps:
1. Plug in appliance to the 12V outlet.
2. Turn on appliance.
3. After use is completed, turn off appliance, unplug appliance
from the unit.
4. Re-charge the PS1118 as soon after use as possible.
Note: The 12V DC outlet is always on. No other switches need to be on
to use this outlet. The PS1118 will NOT automatically turn off power to
the DC outlet. Continuing to use 12V DC appliances after the battery
has been depleted can permanently damage the unit.
Do not operate 12V DC appliances while charging your PS1118. Doing so may
damage the unit and/or your DC appliance.
12V DC appliances vary greatly according to the amount of power they consume.
The wattage consumed by a 12V DC appliance will impact the length of time the
PS1118 will operate the appliance before the need to recharge the PS1118. The
greater the wattage consumed, the lesser the duration of the PS1118 battery
charge. The 12V DC outlet is equipped with an internal circuit breaker which will
automatically cut power to the outlet if the DC appliance causes a direct short or if
the appliance draws excessive amperage. This circuit breaker is designed to
automatically reset once the fault has been corrected and the breaker has cooled to
a normal operating temperature.
012807
All manuals and user guides at all-guides.com
continued
PS1118 Owners Manual Page 9