Maintenance - Kenmore 10000 BTU Manual De Uso Y Cuidado

Cleaning
Before cleaning and maintenance, press the power key is pressed to off and unplug
the power cord from the electrical outlet.
Clean the exterior surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals such as
alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will be
damaged or even the whole machine will be damaged.
Clean the lter screens
If the filter screens become clogged with dust the effectiveness of the air
conditioner is reduced. Be sure to clean the filter screens once every two weeks.
To clean upper lter screen
1. Remove Remote Control from storage slot
in upper filter grille.
2. Insert fingertips beneath PULL tab at top
of screen grille and pull outward
to remove.
3. Remove upper filter screen. Place the
screen into warm water (about 104°F/40°C)
with mild detergent and allow it to air dry
after rinsing clean.
4. Once screen is completely dry, insert back
into place in unit.
5. To reinstall grille, insert tabs at bottom of
grille into slots in unit frame. Push grille
forward to snap into place.
To clean the lower lter screen
1. Grasp the tab in the middle of the lower filter screen and pull outward
gently to remove it.
2. Place the filter screen into warm water (about 104°F/40°C) with mild
detergent and allow it to air dry after rinsing clean.
3. Once screen is completely dry, insert back into place in unit.
To purchase new filter screens call 1-844-553-6667
Page 12

MAINTENANCE