Charging; Learning To Ride - Segway Ninebot KickScooter Max G30P Manual Del Usuario

Ocultar thumbs Ver también para Ninebot KickScooter Max G30P:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

6 Charging

Charging step tips
Charge port
Open the charge
WARNING
Do not charge if the charge port or power cord is wet.
Do not charge or use your battery if it is damaged or see trace of water.
Close the charge port cover when not charging.

7 Learning to Ride

Wear an approved helmet and other protective
gear to minimize any possible injury.
08
Insert the
port cover.
charge plug.
1. Power on the KickScooter and check
the power level indicator. Charge the
KickScooter if the battery level is low.
Close the charge
port cover when
2. Stand on the footrest with one foot
finished.
and push off with another foot to
start gliding.
4. Slow down by releasing the throttle; and
brake by squeezing the brake lever.
WARNING
When hard braking, you risk serious injury due to loss of traction and falls.
Maintain a moderate speed and look out for potential hazards.
3. Put your other foot on the footrest to keep
both feet stable. Press the throttle on the
right hand to speed up when you are
balanced.
Note, for your safety, the motor will not
engage until the KickScooter reaches
1.86 mph (3 km/h).
5. To turn, shift your body weight and
turn the handle slightly.
09
Tabla de contenido
loading

Este manual también es adecuado para:

Ninebot kickscooter max g30

Tabla de contenido