Fein FSC 1.6X Instrucciones De Uso página 14

3 41 01 092 21 0.book Seite 14 Mittwoch, 2. Juli 2008 4:10 16
EN
Fig. 5
Allen key
Clamp cutting blades for the vehicles sector as shown in (Figure. 6).
Before mounting or replacing
WARNING
application tools or accesso-
ries, pull the power plug. This preventive
safety measure rules out the danger of inju-
ries through accidental starting of the
power tool.
For all work or when chang-
CAUTION
ing application tools, always
wear protective gloves. Danger of injury
from the sharp edges of the application
tools. Application tools can become very
hot while working. Danger of burns!
The cutting blades marked with a symbol
(Fig. 6) may only be operated as indicated.
A Cutting blade, straight and curved.
B Cutting blade, bent at right angles.
C Cutting blade, U-form.
D Cutting blade, L-form.
E Scraping knife.
F Scraping knife.
G Cutting blade with stop roller.
The cutting blades marked with a symbol
(Fig. 6) may only be operated as indicated.
14
Tool holder
Clamping
screw
Guide the straight, bent or off-set cutting
blades at a right-angle to the window flange.
For U-form cutting blades, pay attention
that the ridge of the cutting blade is guided
parallel to the vehicle window.
The scraping knife is used for leveling glue
spots on the window flange or windscreen.
Before re-gluing the vehicle windscreen,
the remaining bead is to be leveled to
approx. 2 mm.
FSC 1.6X / FSC 2.0X