Fein FSC 1.6X Instrucciones De Uso página 13

3 41 01 092 21 0.book Seite 13 Mittwoch, 2. Juli 2008 4:10 16
FSC 1.6X / FSC 2.0X
Mounting the "joint renovation" suction device (Figure 4).
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Attach the suction device from the
front onto the gear head and fasten it
to the ventilation slots using the
retaining clip.
Changing the tool.
The application tool can be fastened in the most convenient working position off-
set in 30° steps.
Attaching or changing the cutting blade (Figure 5).
Before mounting or replacing
WARNING
application tools or accesso-
ries, pull the power plug. This preventive
safety measure rules out the danger of inju-
ries through accidental starting of the
power tool.
For all work or when chang-
CAUTION
ing application tools, always
wear protective gloves. Danger of injury
from the sharp edges of the application
tools. Application tools can become very
hot while working. Danger of burns!
Each time before using, also sharpen new
blades with a sharpening stone at the low-
est oscillating frequency.
Unscrew the clamping screw.
Fig. 4
Suction
device
Clean the tool holder, the applica-
tion tool and the clamping screw.
Insert the application tool exactly
into the tool holder. Pay attention that
the application tool faces flush.
Tighten the clamping screw using
the supplied Allen key.
EN
Retaining
clip
13