Blind Hem Stitching - Brother 888-X53 Manual De Instrucciones

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Blind hem stitching

Stitch Name
Blind Hem
Stitch
Stretch Blind
Hem Stitch
Memo
● When the size of cylindrical pieces is too
small to slide onto the arm or the length is
too short, the fabric will not feed and
desired results may not be achieved.
Reverse the skirt or pants.
1
1 Wrong side of fabric
2 Right side of fabric
3 Bottom side
4 Edge of fabric
Fold the fabric along the desired edge of
2
the hem, and press.
1
1 3
1
<Seen
Stitch
Stitch Width
Pattern Length
[mm (inch)]
[mm (inch)]
12
2 (1/16)
14
2 (1/16)
1
1 Wrong side of
fabric
2
2 Right side of
fabric
4
3 Edge of fabric
4 Desired edge of
hem
2
<Thick fabric>
2
<Normal fabric>
3
from the side>
Use a chalk to mark on the fabric about
3
5 mm (3/16 inch) from the edge of the
fabric, and then baste it.
3
5 (3/16)
1
5 (3/16)
1
1
<Seen from the side>
Fold back the fabric inside along the
4
basting.
2
5
2
1
3
1
4
1
<Seen from the side>
Unfold the edge of fabric, and position the
5
fabric with the wrong side facing up.
5
1
1
1
<Seen from the side>
Remove the flat bed attachment and make
6
free-arm sewing possible.
• For details on free-arm sewing, refer to
1 Wrong side of
4
5
2 Right side of
3 Edge of fabric
4 Basting stitching
6
5 5 mm (3/16 inch)
2
6 Desired edge of
2
<Thick fabric>
2
<Normal fabric>
1 Wrong side of
4
2 Edge of fabric
3 Basting
3
4 5 mm (3/16 inch)
5 Desired edge of
6
6 Right side of
7 Basting point
<Thick fabric>
7
<Normal fabric>
1 Wrong side of
2 Right side of
4
3 Basting
1
4 Edge of fabric
5 Desired edge of
6 Basting point
1
3
6
<Thick fabric>
2
<Normal fabric>
"Stitching cylindrical pieces" (Page 21).
fabric
fabric
hem
3
fabric
hem
fabric
fabric
fabric
hem
24