Using The Chronograph - Festina IFM0S90 Manual De Instrucciones

USING THE CHRONOGRAPH

The chronograph is able to measure and display time in 1/100 second united up to
maximum of 59 minutes 59 seconds 99.
[The chronograph 1/100 second hand]
• The chronograph 1/100 second hand moves for 61 seconds after measurment is
started, after which time it will stop at 0 position. After that time, it then changes
to demonstration operation, making one revolution every minute.
[To start the chronograph]
• Press button A.
• The small second hand will advance to the zero position at the same time the
chronograph starts, and then begin to run as the chronograph second hand.
Passed at 1 minute and 1 second after the chronograph has been started:
• The chronograph second hand will change over to running as the chronograph minute
hand.
I F M 0 S 9 0
14
I F M 0 S 9 0
USING THE CHRONOGRAPH
[To stop the chronograph]
• Press button A.
• When the measured time is less than 61 seconds, the chronograph minute,
second and 1/100 second hands will stop at the measured time.
• When the measured time is over 61 seconds, the chronograph minute and
second hands will stop at measured time. The chronograph 1/100 second hand
will remain stopped at the zero position. Read the seconds and minutes from
the chronograph at this time. Next, press button A again to advance the
chronograph 1/100 second hand to the measured time. Read the time in 1/100
seconds from the chronograph at this time.
[To reset the chronograph]
• Press button B.
• The chronograph second hand will change over to running as the second hand
for current time. The other chronograph hands are returned to the zero position.
15