Formatting the memory
Press the
button to open the
configuration mode. Select "Format", press the
OK button and select "YES" to start formatting.
The menu is displayed again after formatting.
The method described above can also be used to delete video clips and
sound recordings.
Caution
Formatting deletes all unprotected data.
Protected data is not deleted but can be formatted. See page 26
for instructions on protecting and unprotecting data.
5 Advanced operation
5.1 Using the flash
If there is not enough available light for your photo, the built-in flash can
provide the additional light required.
1
Switch the camera on and select the photo mode (single shot
or self-timer mode).
2
Press the right button
flash modes. The flash mode changes from "Auto" to "Always
on" to "Off" each time you press the button. The corresponding
status symbol for the flash mode is shown in the upper left
corner of the LCD.
18
once or repeatedly to set one of three