Technical Information; Installation Considerations - Hansgrohe Raindance Select 2jet Showerpipe 27126 1 Serie Instrucciones De Montaje / Manejo / Garantía

Ocultar thumbs Ver también para Raindance Select 2jet Showerpipe 27126 1 Serie:
Tabla de contenido
English

Technical Information

Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate (max.)
showerhead
handshower
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

Inspect
the
showerpipe
damage before installation.
shipping damage made after the showerpipe
is installed will not be honored.
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• This showerpipe requires showerpipe rough
16181181(not included).
• Do not install this showerpipe in a steam shower.
• Make sure that the wall is strong enough to support
the showerpipe. The wall must be reinforced at the
mounting points. The area where the top mounting
piece is to be installed must be flat and free of
protruding grout joints, etc.
Product Safety Notes
• The purpose of the shower arm is to support the
showerhead only. Do not use it to support other
objects.
2
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
2.0 GPM(7.6 L/min)
2.0 GPM (7.6 L/min)
for
shipping
Claims for
• The enclosed screws and anchors are suitable for
a solid surface wall. For other wall constructions,
select mounting hardware and reinforcement
suitable for that specific construction.
• This showerpipe is for use with shower heads rated
at 1.5 GPM (5.7 l/min) or higher.
• Protection against backflow is provided by check
valves.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no
higher than 120°F (49°C). In Massachusetts, the
maximum output temperature can be no higher than
112°F (44°C).
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
• Do not use the showerpipe as a grab bar. Using the
showerpipe as a grab bar may result in injury or
product damage. If a grab bar is required, purchase
and install one separately.
Tabla de contenido
loading

Este manual también es adecuado para:

Raindance select 2jet showerpipe 27126 serie

Tabla de contenido