Turning Power On/Off - Sharp PN-Y555 Manual De Instalación

Caution
• Turn on the monitor first before turning on the PC or
playback device.
Turning on the main power
When the main power is turned on, the power LED lights. Wait
until the screen is displayed.
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
Risk of failure or malfunctioning if the interval is too short.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
Green lit
Orange lit
Green flashing
nDate/time setting
• If the time has not been set, such as when the monitor
•
•
POWER button
Status
is first turned on, set the date and time in DATE/TIME
SETTING of the SETUP menu.
Be sure to set the date and time.
TIPS
Set the time on a 24-hour basis.
The clock stops if the main power remains off for about
1 week.*
(* Approximate time. The actual time varies depending
on the state of the monitor.)
Power LED
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
7
E