Waring Commercial WMO90 Manual Del Usuario página 13

3) In this mode, 00:00 is displayed. Press a number key to set
timer before choosing power level.
4) If you press HOLD 0%, Defrost 20%, Medium 50% or
Med-Hi 70% to choose a power level, the LED will display
your selection. If the same button is pressed twice, the
power will change to PL10, which is 100%. If no power is
chosen, PL10 is the default.
5) Press START to enter Manual Cook Mode. Press STOP to
enter Ready Mode.
MANUAL COOK MODE
1) In this mode, food is cooked. While in Manual Cook Entry
Mode, pressing START begins the Manual Cook Mode.
2) The LED displays the remaining cooking time. The fan and
oven lamp will turn on.
3) When the cooking program is finished, the oven enters End
of Cook Cycle Mode. If you press STOP in this mode, the
oven enters Pause Mode.
END OF COOK CYCLE MODE
1) After the time has expired in the Manual Cook Mode, or the
Preset Program Cook Mode, the oven enters the End of
Cook Cycle Mode.
2) During this mode, End is displayed.
3) If either User Option OP:11 or OP:12 is selected, the oven
continues to sound until the user either opens and closes the
door or presses STOP. If User Option OP:10 is selected, after
the 3-second beep, the oven will go into Idle Mode.
PRESET PROGRAM COOK MODE
1) This mode cooks food using one touchpad operation.
While in Ready Mode, pressing one of 10 digital keys on
the keyboard will cause the oven to run the Preset Program
associated with that key.
2) The LED displays the remaining cooking time. With multi-
stage cooking, the total remaining cooking time is displayed,
and not the cooking time for any particular stage.
3) If the program chosen exceeds the maximum time allowed
by User Option 7, the oven will rapidly beep three times and
display 0:00 to indicate that the program is unacceptable.
13