Adjusting The Bx-Gm5 - Axxess BX-GM5 Instrucciones De Instalación

Adjusting the BX-GM5

Chime level adjustment (digital amplified models only):
• With the vehicle on, turn it off and leave the keys in ignition. Open the driver's
door; chimes will be heard.
• Wait 10 seconds, and then with a small screwdriver, turn the potentiometer
clockwise to raise the chime level; counterclockwise to lower the chime level.
• When the chime is at a desired level, remove the keys from the ignition. This
will lock the chime volume at its current level.
Audio level adjustment (digital amplified models only):
• With the vehicle and radio turned on, turn the volume up 3/4 of the way.
• With a small screwdriver, adjust the potentiometer clockwise to raise the audio
level; counterclockwise to lower the audio level.
• Once at a desired level, your audio level adjustment is complete.
OnStar level adjustment:
• Press the OnStar button to activate it.
• While OnStar is speaking, press the "Volume-Up" or "Volume-Down" buttons on
the steering wheel to raise or lower the OnStar level.
• If the vehicle does not come equipped with steering wheel controls, find the
Black/Yellow wire on the 22-pin harness.
• While OnStar is speaking, tap the Black/Yellow wire to ground. Once the OnStar level
is set, it will stay at that level until the Black/Yellow wire is tapped to ground again.
BX-GM5
Extra features
Factory satellite radio control, and AUX-IN:
• If your vehicle came equipped with factory satellite radio, or an AUX-IN jack,
the BX-GM5 can retain this these features.
Notes when retaining the AUX-IN jack:
1. The AUX-IN jack can only be used if it is a stand-alone AUX-IN jack.
2. If the vehicle comes equipped with an AUX-IN jack and a USB port,
neither can be retained.
• Change the source of the radio to AUX-IN; the satellite radio will start playing.
• The driver's information center--located in the center of your instrument
cluster--will now display your satellite radio information.
• To access advanced features of the satellite radio, press and hold the SOURCE
button on the steering wheel for 3 seconds.
Note: If you do not have steering wheel controls, you will have to use the AX-
LCD screen for this feature.
• To exit, press and hold the SOURCE button on the steering wheel for 3 seconds.
• Listed below are the functions of the steering wheel control buttons while
accessing the advanced features:
• SEEK UP – Scrolls menu up.
• SEEK DOWN – Scrolls menu down.
• VOLUME UP- Enter
6