Troubleshooting - HyperIce Normatec 2.0 Pro Instrucciones De Operación

TROUBLESHOOTING

Problem
The system does not
start
The attachments (legs,
arms, or hips) do not
inflate
The system stopped
pumping
Error Detected
Low Battery
Cannot establish or
maintain a Bluetooth
connection
Call Hyperice customer service at +1.949.565.4994 if further assistance is needed.
20
Possible Causes
Power is not turned on
Power supply is not
securely connected
Faulty electrical wall
outlet
The session has not
been started
The hose is not securely
connected
The attachments have
been damaged
The hose is not securely
connected
The attachments have
been damaged
Air leak
Battery needs to be
charged
Bluetooth is turned off
Solutions
Press the power button to turn the control unit on.
Check that the power supply is securely connected to the
Normatec 2.0 Pro control unit and the electrical outlet.
Check that the wall outlet works.
Tap the start button to start the session.
Check that the hose is securely connected to the Normatec
2.0 Pro control unit and that the attachments are securely
connected to the junction box.
Check that the attachments do not have an air leak.
Check that the hose is securely connected to the Normatec
2.0 Pro control unit and that the attachments are securely
connected to the junction box.
Check that the attachments do not have an air leak.
Check for leaks in the hose or attachment. Check that the
connectors are firmly connected.
Plug in the control unit to charge the battery.
Please see page 11 for battery functionality.
Turn on Bluetooth on both the Normatec 2.0 Pro control unit
and the phone attempting to pair with the Normatec 2.0 Pro
control unit.