Smartbitt SBAVR900 Manual De Usuario página 16

Mounting on Wall & Troubleshooting
AVR user's manual
Installation on a vertical surface.
This AVR can be installed on a vertical surface. There are 2 ways to install it in this kind of surface,
vertically or horizontally
140 mm
Draw.
Draw with a ruler a 140mm
line (Vertical or horizontal
depending on your needs).
Here you will find the most common issues.
If you need any information you can get in contact with our
technical support team via e-mail, telephone or through the webpage
PROBLEM
AVR doesn't turns on.
RJ11 not protecting
Mark.
Mark with a sharp object
each of the ends of the
drawn line, this is where the
center of the mounting
brackets will be.
http://www.smartbitt.com.
POSSIBLE CAUSE
AVR is not correctly plugged
in to AC power source.
Blown fuse
Telephone cable not
correctly plugged in.
Place.
In both of the marks place
one nail/screw on each,
make sure
nails/screws
placed and strong enough
to support the AVR weight.
Place the AVR mounting
brackets
nails/screws, make sure the
AVR is firmly placed.
ACTION
Make sure the AVR is correctly
plugged in to the socket
Check fuse, change if necessary
for one of the same value
Check if telephone cable is correctly
plugged in.
Check if the cable is in operative
conditions.
that the
are firmly
over the
15 / EN