Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IN
OUT
Load connection.
This AVR has 8 power outlets NEMA5-15R (American
standard) which provide automatic voltage regulation, surge
protection and electric noise suppression.
Do not exceed the maximum capacity of your AVR, for this
purpose it's important for you to take advice from the
consumption table further in this manual to avoid malfunc-
tioning of your devices.
For more exactitude on the consumption of your electron-
ic/electric devices it's recommended to see the consumption
of each device, which must be stipulated on the rear panel or
charger of the devices you wish to connect to the AVR.
Modem or telephone line connection.
Connect the telephone line to one of the RJ11 connectors.
Connect your modem/telephone/router into the remaining RJ11
connector. (Only applies for models with RJ11 protection).
Turning on the AVR.
Once you have connected the devices to the AVR, and made sure
that the load doesn't exceeds the capacity of your AVR, now you
can proceed to switch the AVR to the ON position. (I)
14 / EN
Tabla de contenido
