Mx Onda MX-AS2058 Manual De Instrucciones página 68

Finally, attach the floor brush / carpet carpet, to the thickest part of the
second extension tube, see the following figure.
Use of the floor brush / carpet carpet
For cleaning terrazzo, platelet, floor, etc. floors. use
the floor brush E, with the lever in the "
position.
If the floors are carpeted or carpeted, press the
lever with your foot, placing it in the "
position, so that the brush is hidden and thus
facilitates aspiration on the fabric.
To return to the brush position, press the lever with
the foot towards the "
Note: To avoid static electricity that can be generated when rubbing on
carpets, carpets, etc., be careful not to vacuum very fine dust particles for a
long time, thus avoiding the possible accumulation of static electricity in the
extension tube.
Use of double nozzle (fine + brush)
For cleaning window frames, gaps or poorly accessible sites, use the double
nozzle (thin + brush) H.
For insertion and removal follow the same procedure as described for the floor
brush / carpet carpet. If you wish to use the brush, slide it towards the end of
the mouthpiece until you hear a "click", indicating that it is correctly retained. To
pick up the brush and leave the fine nozzle, press the round part of the lock /
unlock button (quick anchor).
" position.
8
"
"
Selection lever