JVC KD-AR3000 Manual De Instrucciones página 16

Display indications when inserting an audio
CD or a CD Text:
Total track number and total
playing time of the inserted CD
Current track and elapsed playing time
Notes:
• MP3 or WMA discs require a longer readout time.
(It differs due to the complexity of the folder/track
configuration.)
• The unit cannot read or play an MP3 track
without the extension code <.mp3>, and a WMA
track without the extension code <.wma>.
To stop play and eject the disc
Press 0.
Disc play stops and the control panel moves
down. The disc automatically ejects from the
loading slot. The source changes to the
previously selected source.
• If you change the source or turn the power off,
disc play also stops (without ejecting the disc).
Next time you select "CD" as the source or turn
the power on, disc play starts from where
playback has been stopped previously.
To return the control panel to its previous
position, press 0 again.
• If you keep the loading slot fully open for about
1 minute, (beeps sound when the "Beep"
setting is turned "On"—see page 39) the
control panel automatically returns to its
previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
16
Display indications when inserting an MP3
or a WMA discs:
Total folder and track numbers
Current folder/track and elapsed playing time
* WMA or MP3 indicator lights up depending on the
first detected track.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
MP3 indicator*