Useful Information - Chicago Pneumatic CP20CHA 20V AUS Manual Del Operador

CHARGER
Maintenance
If the supply cord
•
of this appliance
is damaged, it
must only be re-
placed by a repair
shop appointed by
the manufacturer,
because special
purpose tools are
required.
• It is recommended to treat the battery tool contacts with
contact lubricant Electrolube : ERCG53A35SL.
Without lubricant, the risk is to create electric arc and fast
damaged connectors.
Transporting Lithium Batteries
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accor-
dance with local, national and international provisions and
regulations.
• The user can transport the batteries by road without fur-
ther requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations. Trans-
port preparation and transport are exclusively to be car-
ried out by appropriately trained persons and the process
has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
Disposal
• The disposal of this equipment must follow the legisla-
tion of the respective country.
• All damaged, badly worn or improperly functioning de-
vices MUST BE TAKEN OUT OF OPERATION.
Symbols
T3.15A

Useful Information

Country of origin
China
Copyright
© Copyright 2019, CHICAGO PNEUMATIC Tool Co. LLC,
1815 Clubhouse Road, Rock Hill, SC 29730
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
© Chicago Pneumatic - 8940172297
Please read the instructions carefully before
starting the machine.
Do not burn used battery packs.
Never charge a damaged battery pack. Replace
with a new one.
Time-lag fuse 3.15 A
Class II tool.
This tool is only suitable for indoor use. Never
expose tool to rain.
Do not dispose of electric tools together with
household waste material. Electric tools and
electronic equipment that have reached the end
of their life must be collected separately and re-
turned to an environmentally compatible recy-
cling facility. Check with your local authority or
retailer for recycling advice and collection
point.
European Conformity Mark
National mark of conformity Ukraine
EurAsian Conformity Mark.
Korean Conformity Mark
Regulatory Compliance Mark (RCM), Product
meets applicable regulatory requirements.
7